Introduction
Forklifts keep warehouses, ports and factories in Oman running. When one breaks down unexpectedly, you lose more than repair costs: orders get delayed, other equipment sits idle, and safety is put at risk. Most major breakdowns start as small problems that a 5-minute pre-shift check would have caught.
Here are seven daily checks our service team recommends for every operator, whether you run electric or diesel trucks.
Tyres and wheels
Look for cuts, chunking, embedded debris and uneven wear. On pneumatic tyres, check the pressure. Worn tyres reduce stability, especially when lifting near maximum capacity.
Forks and carriage
Inspect the forks for cracks, bends or heel wear, and make sure the locking pins are secure. If a fork has lost more than 10% of its original thickness, take it out of service.
Hydraulics and mast
Raise and lower the mast fully. Listen for unusual noise, watch for jerky movement, and check the floor under the truck for oil leaks. Inspect the lift chains for stretch and proper lubrication.
Fluids
Check engine oil, coolant and hydraulic oil levels. On electric units, check the battery’s water level and look for corrosion on the terminals.
Brakes and steering
Test the service brake and the parking brake before you load anything. Steering should feel smooth, with no excessive play.
Safety devices
Confirm that the horn, lights, reverse alarm, beacon and seatbelt all work. In Oman’s summer heat, also check that cooling fans and radiators are free of dust and blockages.
Load plate and documentation
Make sure the capacity plate is readable, then record the inspection on the daily checklist. A paper trail helps your service partner spot patterns early.
Daily checks vs scheduled service
Daily checks catch obvious problems. Scheduled preventive maintenance at 250, 500 and 1,000 hours covers what operators can’t see, such as filters, brake wear, electrical diagnostics and hydraulic system health.
How Majan can help
Majan Equipment & Services provides nationwide after-sales support for forklifts and material handling equipment. We have service centres in Muscat, Nizwa, Sohar and Salalah, plus mobile technicians for breakdowns on site. We can set up a preventive maintenance plan that fits your fleet and working hours.

